Transfer Case Adaptor to suit 6L80E to Land Rover / Range Rover LT230 Transfer Case
Land Rover / Range Rover / Discovery Series 2 vehicles being fitted with the GM GEN4 engines & 6L80 6-speed transmission up to the full-time 4WD LT230 transfer case. The 6L80 transmission length is approximately 60mm longer than the original ZF transmission. To compensate for this extra length, the tail shafts will require modification.
This kit will also suit the GM 6L90E automatic transmission with a 32-tooth spline output shaft.
The 6L90 case is 35mm longer than the 6L80, which pushes the transfer case approximately 95mm towards the rear of the vehicle. To compensate for this extra length, the transfer case mounts and tail shafts will require modification.
Kit Includes
- Transfer case Adaptor Housing – 6L80 to LT230
- 6L80 output (32 tooth spline) to transfer input adaptor shaft
- Bolts, Washers, SHCS, Grub screws, seals etc
- Downloadable Instructions
To Suit
- Land Rover / Range Rover LT230 transfer case
Notes
- For a kit including Engine & Chassis mounts, refer to MFP40200
There are no reviews yet.